dmesg - Intel Xeon E312xx
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-61-virtual (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #93-Ubuntu SMP Fri May 2 21:54:33 UTC 2014 (Ubuntu 3.2.0-61.93-virtual 3.2.55)
Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-61-virtual root=LABEL=cloudimg-rootfs ro console=ttyS0
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfffd000 (usable)
BIOS-e820: 00000000dfffd000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000420000000 (usable)
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: OpenStack Foundation OpenStack Nova, BIOS Bochs 01/01/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x420000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106
last_pfn = 0xdfffd max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f14e0] f14e0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000dfffd000
0000000000 - 00c0000000 page 1G
00c0000000 - 00dfe00000 page 2M
00dfe00000 - 00dfffd000 page 4k
kernel direct mapping tables up to dfffd000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000420000000
0100000000 - 0400000000 page 1G
0400000000 - 0420000000 page 2M
kernel direct mapping tables up to 420000000 @ dfffb000-dfffd000
RAMDISK: 37726000 - 37b8b000
ACPI: RSDP 00000000000f1490 00014 (v00 BOCHS )
ACPI: RSDT 00000000dfffd9f0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000dffffb60 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000dfffda30 01137 (v01 BXPC BXDSDT 00000001 INTL 20100528)
ACPI: FACS 00000000dffffb00 00040
ACPI: SSDT 00000000dfffed10 00DE7 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000dfffebb0 000F0 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 00000000dfffeb70 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000420000000
Initmem setup node 0 0000000000000000-0000000420000000
NODE_DATA [000000041fffb000 - 000000041fffffff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1cf7681, boot clock
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00420000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000dfffd
0: 0x00100000 -> 0x00420000
On node 0 totalpages: 4194188
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 897085 pages, LIFO batch:31
Normal zone: 51200 pages used for memmap
Normal zone: 3225600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfffd000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000
PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1effc000)
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041fc00000 s82880 r8192 d23616 u131072
pcpu-alloc: s82880 r8192 d23616 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
kvm-clock: cpu 0, msr 4:1fc13681, primary cpu clock
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 41fc0dd40
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4126599
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-61-virtual root=LABEL=cloudimg-rootfs ro console=ttyS0
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16426460k/17301504k available (6564k kernel code, 524752k absent, 350292k reserved, 6631k data, 924k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:4352 nr_irqs:808 16
Console: colour VGA+ 80x25
console [ttyS0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Detected 2699.998 MHz processor.
Calibrating delay loop (skipped) preset value.. 5399.99 BogoMIPS (lpj=10799992)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 10 MCE banks
ACPI: Core revision 20110623
ftrace: allocating 26584 entries in 105 pages
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Xeon E312xx (Sandy Bridge) stepping 01
Performance Events: SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
KVM setup async PF for cpu 1
kvm-stealtime: cpu 1, msr 41fc2dd40
NMI watchdog enabled, takes one hw-pmu counter.
kvm-clock: cpu 1, msr 4:1fc33681, secondary cpu clock
#2
smpboot cpu 2: start_ip = 9a000
KVM setup async PF for cpu 2
kvm-stealtime: cpu 2, msr 41fc4dd40
kvm-clock: cpu 2, msr 4:1fc53681, secondary cpu clock
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 9a000
KVM setup async PF for cpu 3
kvm-stealtime: cpu 3, msr 41fc6dd40
NMI watchdog enabled, takes one hw-pmu counter.
kvm-clock: cpu 3, msr 4:1fc73681, secondary cpu clock
#4
smpboot cpu 4: start_ip = 9a000
KVM setup async PF for cpu 4
kvm-stealtime: cpu 4, msr 41fc8dd40
NMI watchdog enabled, takes one hw-pmu counter.
kvm-clock: cpu 4, msr 4:1fc93681, secondary cpu clock
#5
smpboot cpu 5: start_ip = 9a000
KVM setup async PF for cpu 5
kvm-stealtime: cpu 5, msr 41fcadd40
kvm-clock: cpu 5, msr 4:1fcb3681, secondary cpu clock
NMI watchdog enabled, takes one hw-pmu counter.
#6
smpboot cpu 6: start_ip = 9a000
KVM setup async PF for cpu 6
kvm-stealtime: cpu 6, msr 41fccdd40
kvm-clock: cpu 6, msr 4:1fcd3681, secondary cpu clock
NMI watchdog enabled, takes one hw-pmu counter.
#7
smpboot cpu 7: start_ip = 9a000
KVM setup async PF for cpu 7
kvm-stealtime: cpu 7, msr 41fcedd40
kvm-clock: cpu 7, msr 4:1fcf3681, secondary cpu clock
NMI watchdog enabled, takes one hw-pmu counter.
#8
smpboot cpu 8: start_ip = 9a000
KVM setup async PF for cpu 8
kvm-stealtime: cpu 8, msr 41fd0dd40
kvm-clock: cpu 8, msr 4:1fd13681, secondary cpu clock
NMI watchdog enabled, takes one hw-pmu counter.
#9
smpboot cpu 9: start_ip = 9a000
KVM setup async PF for cpu 9
kvm-stealtime: cpu 9, msr 41fd2dd40
kvm-clock: cpu 9, msr 4:1fd33681, secondary cpu clock
NMI watchdog enabled, takes one hw-pmu counter.
#10
smpboot cpu 10: start_ip = 9a000
KVM setup async PF for cpu 10
kvm-stealtime: cpu 10, msr 41fd4dd40
kvm-clock: cpu 10, msr 4:1fd53681, secondary cpu clock
NMI watchdog enabled, takes one hw-pmu counter.
#11
smpboot cpu 11: start_ip = 9a000
kvm-clock: cpu 11, msr 4:1fd73681, secondary cpu clock
KVM setup async PF for cpu 11
kvm-stealtime: cpu 11, msr 41fd6dd40
NMI watchdog enabled, takes one hw-pmu counter.
#12
smpboot cpu 12: start_ip = 9a000
kvm-clock: cpu 12, msr 4:1fd93681, secondary cpu clock
KVM setup async PF for cpu 12
kvm-stealtime: cpu 12, msr 41fd8dd40
NMI watchdog enabled, takes one hw-pmu counter.
#13
smpboot cpu 13: start_ip = 9a000
KVM setup async PF for cpu 13
kvm-stealtime: cpu 13, msr 41fdadd40
NMI watchdog enabled, takes one hw-pmu counter.
kvm-clock: cpu 13, msr 4:1fdb3681, secondary cpu clock
#14
smpboot cpu 14: start_ip = 9a000
kvm-clock: cpu 14, msr 4:1fdd3681, secondary cpu clock
KVM setup async PF for cpu 14
kvm-stealtime: cpu 14, msr 41fdcdd40
NMI watchdog enabled, takes one hw-pmu counter.
#15 Ok.
smpboot cpu 15: start_ip = 9a000
KVM setup async PF for cpu 15
kvm-stealtime: cpu 15, msr 41fdedd40
NMI watchdog enabled, takes one hw-pmu counter.
kvm-clock: cpu 15, msr 4:1fdf3681, secondary cpu clock
Brought up 16 CPUs
Total of 16 processors activated (86399.93 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
print_constraints: dummy:
RTC time: 18:29:36, date: 06/27/14
NET: Registered protocol family 16
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff]
pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io 0xc0a0-0xc0af]
pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
pci 0000:00:01.2: reg 20: [io 0xc040-0xc05f]
pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
pci 0000:00:03.0: reg 10: [io 0xc060-0xc07f]
pci 0000:00:03.0: reg 14: [mem 0xfebf1000-0xfebf1fff]
pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:00:04.0: [1af4:1001] type 0 class 0x000100
pci 0000:00:04.0: reg 10: [io 0xc000-0xc03f]
pci 0000:00:04.0: reg 14: [mem 0xfebf2000-0xfebf2fff]
Freeing initrd memory: 4500k freed
pci 0000:00:05.0: [1af4:1002] type 0 class 0x0000ff
pci 0000:00:05.0: reg 10: [io 0xc080-0xc09f]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000dfffd000 - 00000000dfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xe0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io 0x0060]
pnp 00:02: [io 0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io 0x03f2-0x03f5]
pnp 00:04: [io 0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io 0x02f8-0x02ff]
pnp 00:06: [irq 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800dbffb000 - ffff8800dfffb000
software IO TLB at phys 0xdbffb000 - 0xdfffb000
audit: initializing netlink socket (disabled)
type=2000 audit(1403893775.700:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 32091
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:03.0: setting latency timer to 64
virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
virtio-pci 0000:00:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:05.0: setting latency timer to 64
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
vda: vda1
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 43 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 2:864:494
rtc_cmos 00:01: setting system clock to 2014-06-27 18:29:37 UTC (1403893777)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 924k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1188k freed
udevd[158]: starting version 175
FDC 0 is a S82078B
usb 1-1: new full-speed USB device number 2 using uhci_hcd
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
Refined TSC clocksource calibration: 2700.392 MHz.
EXT4-fs (vda1): re-mounted. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[395]: starting version 175
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
type=1400 audit(1403893778.537:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=473 comm="apparmor_parser"
type=1400 audit(1403893778.537:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
type=1400 audit(1403893778.537:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
init: udev-fallback-graphics main process (751) terminated with status 1
init: failsafe main process (778) killed by TERM signal
type=1400 audit(1403893782.129:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=840 comm="apparmor_parser"
type=1400 audit(1403893782.129:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=840 comm="apparmor_parser"
type=1400 audit(1403893782.133:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=840 comm="apparmor_parser"
type=1400 audit(1403893782.133:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=842 comm="apparmor_parser"
eth0: no IPv6 routers present
hrtimer: interrupt took 11981536 ns
init: bluetooth main process (14857) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (14886) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (14915) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (14942) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (14980) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (15003) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (15032) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (15064) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (15096) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (15124) terminated with status 1
init: bluetooth main process ended, respawning
init: bluetooth main process (15157) terminated with status 1
init: bluetooth respawning too fast, stopped
Clocksource tsc unstable (delta = 78016159 ns)